Product Name: powder metallurgy part, powder metallurgy safety harness part , sintered part for safety harness of cars, sintered safety harness spear part.
Key words: powder metallurgy, powder metallurgy part, powder metallurgy technology, sintered part, sintering process, PM part.
Process: Conventional powder metallurgy process, sintering process.
Size: Receiver—68 mm (2.7 in.)
Clevis End—28 mm (1.1 in.)
Articulating Link—7.5 mm (0.3 in.)
Weight: Receiver—11 g (0.024 lb.)
Clevis End—7 g (0.015 lb.)
Articulating Link—0.097 g (0.0002 lb.)
Alloy: 17-4 PH Stainless Steel
Tensile Strength:1,180 MPa (170,000 psi)
Yield Strength: 1,100 MPa (160,000 psi)
Apparent Hardness:36 HRC
Density: 7.5 g/cm³ (0.27 lb./in.³)
Secondary Operations: Sizing and Heat Treating
The parts adhere to precision tolerance requirements. The receiver has a 0.71 mm (0.028 in.) wall section which forms a slot held to 8.698.79 mm (0.3420.346 in.) over the entire length. The clevis holds a roundness of 11.7 mm ± 0.05 mm (0.460 in. ± 0.002 in.) on a 0.864 mm (0.034 in.) wall section. The link holes are held to 1.19 mm ± 0.019 mm (0.047 ± 0.00075 in.).
The receiver is thin walled with a required varying wall section over a length of 50.8 mm (2 in.). The clevis has a thin wall of 0.711 mm (0.028 in.).
The endoscopic device combines a 45° bilateral articulation with a 360° rotation, providing excellent maneuverability and tissue access for endoscopic procedures such as appendectomies, lung resections, colectomies, splenectomies, and nephrectomies.